If the server has a directory structure, the image file is written to or copied from the directory associated with the remote username on the server. Before you begin downloading or uploading an image file by using RCP, do these tasks:.
If the switch IP address translates to Switch1. For more information, see the documentation for your RCP server. You can download a new image file and replace or keep the current image. To keep the current image, go to Step 6. This step is required only if you override the default remote username see Steps 4 and 5. Downloads the images file from the RCP server to the switch and overwrites the current image. Downloads the images file from the RCP server to the switch and saves the current image.
If there is not enough room to install the new image and keep the running image, the download process stops, and an error message is displayed. You can upload an image from the switch to an RCP server. The upload feature should be used only if the web management pages associated with Device Manager have been installed with the existing image.
Uploads the currently running switch image to the network server. Skip to content Skip to search Skip to footer. Book Contents Book Contents. Find Matches in This Book. PDF - Complete Book 1. Updated: March 28, Chapter: Working with Image Files. These sections contain this configuration information: Note For a list of software images and the supported upgrade paths, see the release notes.
File Format of Images on a Server or Cisco. Ensure that the switch has a route to the TFTP server. The switch and the TFTP server must be in the same subnetwork if you do not have a router to route traffic between subnets.
Check connectivity to the TFTP server by using the ping command. For download operations, ensure that the permissions on the file are set correctly. The permission on the file should be world-read. Before uploading the image file, you might need to create an empty file on the TFTP server.
To create an empty file, enter the touch filename command, where filename is the name of the file you will use when uploading the image to the server. During upload operations, if you are overwriting an existing file including an empty file, if you had to create one on the server, ensure that the permissions on the file are set correctly.
Permissions on the file should be world-write. Caution For the download and upload algorithms to operate properly, do not rename image names. When you copy an image file from the switch to a server by using FTP, the Cisco IOS software sends the first valid username in this list: The username specified in the archive download-sw or archive upload-sw privileged EXEC command if a username is specified. The username set by the ip ftp username username global configuration command if the command is configured.
The switch sends the first valid password in this list: The password specified in the archive download-sw or archive upload-sw privileged EXEC command if a password is specified.
The password set by the ip ftp password password global configuration command if the command is configured. The switch creates a password named username switchname. The username variable is the username associated with the current session, switchname is the configured hostname, and domain is the domain of the switch. Before you begin downloading or uploading an image file by using FTP, complete these tasks: Ensure that the switch has a route to the FTP server.
The switch and the FTP server must be in the same subnetwork if you do not have a router to route traffic between subnets. Check connectivity to the FTP server by using the ping command. If you are accessing the switch through the console or a Telnet session and you do not have a valid username, make sure that the current FTP username is the one that you want to use for the FTP download. You can enter the show users privileged EXEC command to view the valid username.
If you do not want to use this username, create a new FTP username by using the ip ftp username username global configuration command. This new name will be used during all archive operations. If you are accessing the switch through a Telnet session and you have a valid username, this username is used, and you do not need to set the FTP username.
Include the username in the archive download-sw or archive upload-sw privileged EXEC command if you want to specify a username for that operation only. When you upload an image file to the FTP server, it must be properly configured to accept the write request from the user on the switch. Command Purpose Step 1 configure terminal Example: Switch configure terminal Optional Enters global configuration mode on the switch.
When you copy an image from the switch to a server by using RCP, the Cisco IOS software sends the first valid username in this list: The username specified in the archive download-sw or archive upload-sw privileged EXEC command if a username is specified.
The username set by the ip rcmd remote-username username global configuration command if the command is entered. Can you advise if you are connected via WiFi or hardwired? In addition, please make sure that all cables are finger tight on both the modem and wall plate. Sorry for the delay, things got busy for me.
It seem my connect has been switch as I am seeing closer to the 1 GB. From the router where it was showing the low speed will now show the correct speed. I have a system that seems to have an issue, but it isn't related to Comcast. I have not tried to download the file for the modem again as that requires restarting the modem , but it would be nice if Comcast could look into why that file does not seem to want to work on the modem it was setup for which is the Arris SB I will try and restart the modem soon to see if it still comes up as an issue.
Hello kbrown. We're happy to hear you're receiving the right speeds now. What kind of file are you referring to that needs to update in the modem? Looking at the logs, I see the following:. This happens even if it is only connected to Coax, so it is something that is pushed from xfinity most likely to configure the modem correctly to work correctly. You are here Home Documentation Technical Reference swconfig. Show pagesource Old revisions Backlinks Back to top.
LEDs: swconfig dev rtls port 0 set led 2 swconfig dev rtlrb set apply. Most Ethernet switches found in small routers are managed switches which allow the following operations: configure a port to belong to a particular set of VLANs either as tagged or untagged. OpenWrt Forum. This website uses cookies. By using the website, you agree with storing cookies on your computer.
0コメント